 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Stellar Cable75 Specifications
| 01. Dimensions | |
| A 281” B 174” C 5-6” D 96” Max E 166” F 47 Degrees G 43” Max H 51-55” |
 |
| 02. Cylinder Mounts |
 |
| 03. Standard Equipment | |
| Hoist rated capacity | Up to 75,000 lbs |
| Main frame | 8” x 4” x 1/2” A500 C tubing |
| Sub frameless | 1.13" spacers support the main frame when stowed (optional sub frame available) |
| Front stop | 1” plate |
| Container lock | Automatic spring loaded |
| Lift cylinder shaft | 2.5” stainless steel with boxed beam double shear |
| Rear hinge shaft | 2.5” stainless steel |
| Cable | 7/8” (6 x 37 EXIWRC) |
| Cable sheaves | Front sheave 13.38” / Reeving 10” |
| Cable anchor | 4 cable clamps |
| Cable end | Steel casting |
| Rear hold down | 1” plate located for optional bolt on hold downs (ratchet strap standard) |
| Lift cylinders | 5” x 71” D.A. |
| Reeving cylinder | 6.5” x 80” D.A. |
| Direct mount pump | Piston type 25 GPM @ 1500 RPM |
| Operating pressure | 3,600 PSI for 60,000 lbs and 4,500 PSI for 75,000 lbs |
| Hydraulic valve | 2 spool 25 GPM safety bypass |
| Hydraulic reservoir | 25-gallon 10 micron filter & screen filter |
| Outside rollers | 4” O.D. with bronze bearing and grease zerk |
| Inside rollers | 6” O.D. hardened roller & pins |
| Pivot points | Bushings and grease zerks |
| Safety stand | Accessible each side |
| I.C.C. Bumper | Folding, mounting lugs factory installed |
| Rear bumper | Pre-drilled bolt mount - LED sealed beam backup, clearance and tail lights |
| Hoist-up alarm | |
| Inside cable and outside controls | |
| 04. Optional Equipment | |
| Inside controls | Direct connect, cable or pneumatic |
| Remote mount hydraulic pump | Piston type 25 GPM @ 1500 RPM |
| Auxiliary fold down front stops | For short containers |
| Full fenders | Tandem or tri-axle, 12 ga. steel or poly |
| Tarp rack / tool box combination | 20” x 15” x 48” |
| 3 and 4 Spool valve | For use with optional equipment as needed |
| Additional hydraulic lines | Single-acting hydraulic line to rear (Requires the 3 spool valve option or selector valve) |
| Double-acting hydraulic line to rear (Requires the 3 spool valve option or selector valve) | |
| Double-acting hydraulic line to side (Requires the 3 spool valve option or selector valve) | |
| “Drop-in” Stops | For short containers |
| Cab Guard | |
| PTO air operated with signal light | |
RELATED LINKS