Dealer Login | Site Map | Contact
 

 

 

 


 

The Stellar Container Carriers with Optional Rotator

The Stellar Industries Container Carriers can meet all your container delivery, switching and now dumping needs available with the optional 360° rotator attachment.

The Stellar Container carrier boasts an 8,000-pound lifting, dumping and transporting capacity. The ECCR model features extendable forks for easy pick-up and placement of containers, continuous rotation for dumping from either side, and has the ability to distribute significantly more weight to the front axle than competitive models.

Stellar Container Carrier features include improved visibility of rear lights, less cylinders and seal kits to maintain, and an overall heavy-duty construction and the ability to move front-load and rear-load containers.

Equipped with the hydraulic 360 degree continuous rotator, the container carrier can dump front-load containers with no limit to the direction or extent of the dump angle.

 

Model ECCR: Extendable and retractable fork body with rotator
Model CCR: Non-extending with rotator
Model CC: Non-extending, non-rotating

Specifications: ECCR

Lifting capacity
Dumping capacity
Transporting capacity*
Container sizes
Type of containers
Rotation
Stacking capability
Operating pressure
GPM
Hydraulic tank
Recommended CA
Controls
Bushings and grease zerks
Container bumpers
Hydraulic pump
Valve bank
Min. chassis
Shipping weight

8,000 lbs (3,629 kg)
8,000 lbs (3,629 kg)
8,000 lbs (3,629 kg)
2-10 yd
Front and rear load containers
Worm/turntable gear bearings
2-8 yd
4,500 psi (31 mpa)
12 (45 lpm)
10-gallon (38 ltr)
84" to 114" (2,134 to 2,896 mm)
Inside & outside controls
At all pivot and rotation points
Molded rubber
Bent axis piston type
4-spool cable controlled
26,000 lbs (11.8 mt)
3,102 lbs (1,407 kg)

 

Specifications: CCR

Lifting capacity
Dumping capacity
Transporting capacity*
Container sizes
Type of containers
Rotation
Stacking capability
Operating pressure
GPM
Hydraulic tank
Recommended CA
Controls
Bushings and grease zerks
Container bumpers
Hydraulic pump
Valve bank
Min. chassis
Shipping weight

8,000 lbs (3,629 kg)
8,000 lbs (3,629 kg)
8,000 lbs (3,629 kg)
2-10 yd
Front and rear load containers
Worm/turntable gear bearings
2-8 yd
4,500 psi (31 mpa)
12 (45 lpm)
10-gallon (38 ltr)
84" to 114" (2,134 to 2,896 mm)
Inside & outside controls
At all pivot and rotation points
Molded rubber
Bent axis piston type
3-spool cable controlled
26,000 lbs (11.8 mt)
3,000 lbs (1,361 kg)

 

Specifications: CC

Lifting capacity
Dumping capacity
Transporting capacity*
Container sizes
Type of containers
Rotation
Stacking capability
Operating pressure
GPM
Hydraulic tank
Recommended CA
Controls
Bushings and grease zerks
Container bumpers
Hydraulic pump
Valve bank
Min. chassis
Shipping weight

8,000 lbs (3,629 kg)
-
8,000 lbs (3,629 kg)
2-10 yd
Front and rear load containers
-
2-8 yd
4,500 psi (31 mpa)
12 (45 lpm)
10-gallon (38 ltr)
84" to 114" (2,134 to 2,896 mm)
Inside & outside controls
At all pivot and rotation points
Molded rubber
Bent axis piston type
2-spool cable controlled
26,000 lbs (11.8 mt)
2,084 lbs (945 kg)

 

From the top of the frame rail to the bottom of the fork is 78.34" (199 cm).

The center of gravity of the ECCR unit is located approximately 9.25" in front of the rear axle. In the stored position, the center of gravity of the container is located approximately 45" behind rear axle.

 

* Truck chassis manufacturer's specific body and equipment weight and center of gravity limitation must not be exceeded. Stellar® Container Carrier installation will require calculation of CG for compliance with Federal Motor Vehicle Safety Standards.

 

 


See the ECCR Container Carrier in Action!

Watch the Promotional Video


 

RELATED LINKS

» Stellar Container Carrier Brochure

» Brochure Downloads

 

 

   
 

© Stellar Industries, Inc. | Terms and Conditions | Site Map | Affiliates | Contact