Stellar Hooklift System
Stellar Flex36 - Up to 16,000 capacity

 

 

The Stellar Flex36 series hooklift is a technologically advanced hooklift that has been designed to replace ten current Stellar hooklift models with four. These four Flex36 Series hooklifts, accommodating cab to axle measurements of 60, 84, 108 and 120 can be pressure adjusted* to accommodate lifting capacities ranging from 9,000 pounds up to 16,000 pounds depending on the GVWR of the chassis.

No other hooklift manufacturer currently offers this kind of flexibility. The Flex36 can handle dump containers ranging from 8’ to 15’ and flatbeds ranging from 10’ to 16’ and has a lifting capacity of up to 16,000-pounds. It has a maximum dump angle of 50 degrees to 54 degrees, depending on the length of body.

  • Standard in-cab manual controls which allow for precise metering of the manual hydraulic valve.
    .
  • Patented dump/load interface
    .
  • Hydraulic locks to prevent cylinder movement in case of pressure loss
    .
  • Mechanical rear body tie-down latches
    .
  • Resettable dump/tilt tabs
    .
  • Hydraulic rotary valve to prevent front tilt movement when the dump frame is raised
    .
  • Full length dump frame with front saddles to support the body during the dump mode
    .
  • DX pre-lubricated bushings used at pivot points
    .
  • Grease zerks at all pin points to allow purging of contaminates
    .
  • Greaseable load rollers
  • Stainless steel pins used throughout.
  • All weldments painted with DuPont® Imron® 5000.

Item Description
Lifting / Dumping Cap.
Dump Angle
Effective Length
Cab to Axle
Shipping Weight
Rec. Body Lengths
Rec. Longest Flatbed
Hook Height
Min. Truck GVWR

 60-8
Up to 9,000
54 deg.
91”
60"11
1,275
8 ’ to 9'
To 10'
35.63”
10,500-15,000 		84-10
Up to 16,000
53 deg.
115”
84” to 96"11
1,360
10’ to 12'
To 13'
35.63”
10,500-26,000 		108-12
Up to 16,000
54 deg.
142”
108 ” to 120 "11
1,615
12’ to 14'
To 15'
35.63”
10,500-26,000		 120-14
Up to 16,000
50 deg.
151”
120 ” to 130 "11
1,650
13’ to 15'
To 16'
35.63”
10,500-26,000

* Please consult Stellar Flex36 owner's manual for
proper adjustment procedures.