 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Flex36
(Up to 16,000 lb. capacity)
Stellar SI816 Series Hook Hoist
- The SI816 Hooklift allows for up to a 60° offset when loading the container. The sliding "L" arm permits hauling bodies shorter than the hoist.
- An optional 12,000 lb. rear mounted winch is available.
- The conainer is supported by 6 rollers both for transport and dumping.
- All critical components manufactured with 100,000 p.s.i. minimum yield alloy steel.
The SI816 is designed to out perform the competitive units with its easy to operate durable design. A tilt frame and boom built of high strength steel and a low pressure hydraulic system results in low maintenance cost. The lift cylinders are equipped with integral dual counterbalance valves for safety. A 2" thick hook with a safety lock is standard.
SI816 Specifications |
|
| Chassis C.A. | 138", 156" |
| G.V.W. | 33,000 lb. min |
| Shipping Weight | 5,150 lb. (approx.) |
| Load Capacity | 32,000 lb. |
| Hydraulics | 3,000 PSI Operating |
| Gear Pump | 28 GPM @ 1,500 RPM |
SI816 |
816-138-54 | 816-138-62 | 816-156-54 | 816-156-62 | ||||
| Container/Body Length | 12 1/2' | 16' | 12 1/2' | 16' | 14' | 17 1/2' | 14' | 17 1/2' |
| Load Angle | 37° | 28° | 35° | 28° | 33° | 25° | 32° | 24° |
| Dump Angle | 47 | 47 | 47 | 47 | ||||
| Truck Frame Height | 41 | 41 | 41 | 41 | ||||
| Chassis Cab to Axle | 138 | 138 | 156 | 156 | ||||
| Chassis Cab to Trunion | 134 | 134 | 152 | 152 | ||||
| Effective Length | 161 1/2 | 161 1/2 | 179 1/2 | 179 1/2 | ||||
| Min. Clear Truck Frame Length | 183 | 183 | 201 | 201 | ||||
| Lowest ground to Hook | 47 | 41 | 54 | 61 3/4 | ||||
| Hook Height (to bottom of bar) | 54 | 61 3/4 | 54 | 61 3/4 | ||||
| Hook Height (top of roller) | 52 3/4 | 60 1/2 | 52 3/4 | 60 1/2 | ||||
| Axle to Rear Frame | 28 - 45 | 28 - 45 | 28 - 45 | 28 - 45 | ||||
| Trunion to Rear Frame | 49 | 49 | 49 | 49 | ||||
| Hold Down Location (From Hook) | 156 | 156 | 174 | 174 | ||||
| Hook Height | 36" | 54" | 36" | 54" | ||||
